Board Arduino Nano
Deek Robot Terminal-Adapter No soldering or plug of jumper pins more. You can now cable tensile fix with screw. Perfect if your prototype is in the testing phase and they want to avoid sliding out cable. But they remain nevertheless flexible without soldering. Perfect for example,: Test phases in prototypes If you want to use thick control lines on Arduino.
Elegoo Nano board is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Technical specs Microcontroller: ATmega328 Architecture: AVR Operating Voltage: 5 V Flash Memory: 32 KB of which 2 KB used by bootloader SRAM: 2 KB Clock Speed: 16 MHz Analog I/O Pins: 8 EEPROM: 1 KB DC Current per I/O Pins: 40 mA (I/O Pins) Input Voltage: 7-12 V Digital I/O Pins: 22 PWM Output: 6 Power Consumption: 19 mA PCB Size: 18 x 45 mm Weight: 7 g Package Include : 1 X Nano Board 1 x USB cable
Terminal Expansion Board Assembly Kit, Proto Shield for Arduino NanoExtend your Arduino Nano with this handy assembly kit. Easily connect wires with a cross section of up to 1.5 mm².All 30 pins are supported by the terminal.The expansion module is built for Arduino Nano V3 and compatible boards.
With self-adhesive tape on the back, ideal for DIY projects including Arduino. It has 17 holes x 10. Total 170 holes. It can also be permanently mounted with screws (not included). Features: • Nubbins and slots on the sides to connect multiple breadboards together • Coordinates for easy component placement • Phosphor bronze nickel plated spring clips • Accepts a variety of wire sizes (20-29 AWG) • Dimensions: 45mm x 34.
Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For ArduinoFeatures:Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For ArduinoFully Compatible to Arduino Nano V3.0 ATmega328P-AUATmega328 MicrocontrollerBootloader installed, ready to upload sketches from Arduino softwareMicrocontroller ATmega328P-AUOperating Voltage :5VInput Voltage (recommended) 7V-12VInput Voltage (limits) 6V-20VDigital I/O Pins 14 (of which 6 provide PWM output)Analog Input Pins 8DC Current per I/O Pin 40 mADC Current for 3.
The kit contain many common components for you to start your first project. If you need MORE INFORMATION, please contact us via email to get support. Note: This kit is NOT INCLUDE the AC/DC adapter, you need to buy it separately. Component listing: 1pcs Power Supply Module 1pcs 65 Jumper Wire 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs Precision Potentiometer 1pcs IC 4N35 1pcs IC 74HC595 1pcs Thermistor 1pcs RGB LED 2pcs Photoresistor 2pcs Pin header (40pin) 10pcs Button (small) 10pcs White LED 10pcs Yellow LED 10pcs Blue LED 10pcs Green LED 10pcs Red LED 10pcs Resistor (10R) 10pcs Resistor (100R) 10pcs Resistor (220R) 10pcs Resistor (330R) 10pcs Resistor (1K) 10pcs Resistor (2K) 10pcs Resistor (5K1) 10pcs Resistor (10K) 10pcs Resistor (100K) 10pcs Resistor (1M) 20pcs Female-to-male Dupont Wire 1pcs 400 tie-points Breadboard 5pcs Diode Rectifier (1N4007) 5pcs NPN Transistor (2N2222) 5pcs Electrolytic Capacitor (10UF 50V) 5pcs Electrolytic Capacitor (100UF 50V) 10pcs 22pf Ceramic Capacitor 10pcs 104 Ceramic Capacitor About Smraza: We are a leading manufacturer of electronic components for Arduino and Raspberry Pi.
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one. Technical specs Microcontroller: ATmega328 Architecture: AVR Operating Voltage: 5 V Flash Memory: 32 KB of which 2 KB used by bootloader SRAM: 2 KB Clock Speed: 16 MHz Analog I/O Pins: 8 EEPROM: 1 KB DC Current per I/O Pins: 40 mA (I/O Pins) Input Voltage: 7-12 V Digital I/O Pins: 22 PWM Output: 6 Power Consumption: 19 mA PCB Size: 18 x 45 mm Weight: 7 g Package Include : 3 X Nano Board
Specification: -CH340G Replace FT232RL. -Operating Voltage(logic level): 5V. -8 analog inputs ports:A0 ~ A7. -14 Digital input / output ports:TX,RX,D2 ~ D13. -6 PWM ports:D3, D5, D6, D9, D10, D11. -1 pairs of TTL level serial transceiver ports RX / TX. -Support USB download and Power. -Support for external 5V ~ 12V DC power supply. -Support power supply by 9V battery.
Box Contents: 1)UNO R3 development boardx1 2)USB cable x1 3)Prototype extension board x1 4)Mini breadboard x1 5)5V stepper motor x1 6)2003 stepper motor driver board x1 7)Red LED x5 Green LED x5 Yellow LED x5 8)Vibration Sensor x2 9)Flame sensor x1 10)LM35 temperature sensor x1 11)Infrared receiver x1 12)Photoresistor x3 13)Key cap x 4 14)Key switch x4 15)Adjustable potentiometer x1 16)Passive buzzer piezo buzzer x1 17)Active buzzer tone generator x1 18)Jumper cap x1 19)Large breadboard x1 20)Remote Control x 1 21)1602 Screen x1 22)Breadboard module x1 23)HC-SR04 module x1 24)DuPont line 1 x10pin 25)Breadboard lineapproximately x30 26)8*8 dot matrix x1 27)One digit eight segment tube x 1 28)Four digit eight segment tube x1 29)IC 74HC595 x1 30)Battery Holder x1 31)220 ohm Resistance x5 330 ohm Resistance x5 1K ohm resistance x5 10K ohm resistance x5 32)Battery 9V x1 33)40pin header 2.